Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Pro Blog
  • Users
  • Groups
  • Unsolved
  • Solved
Collapse
Secnto AI
  1. Secnto AI
  2. Categories
  3. Virtual University
  4. MTH304 - Statics
  5. MTH304 Assignment 3 Solution and Discussion
MTH304 Assignment 1 Solution and Discussion
cyberianC
Re: [MTH304 Assignment 1 Solution and Discussion Assignment # 1 MTH304 (SPRING 2020) Maximum Marks: 20 Due Date: 15 -06-2020 DON’T MISS THESE: Important instructions before attempting the solution of this assignment: • To solve this assignment, you should have good command over First 10 lectures. • Try to get the concepts, consolidate your concepts and ideas from these questions which you learned in first 10 lectures. • Upload assignments properly through LMS, No Assignment will be accepted through email. • Write your ID on the top of your solution file. • Don’t use colorful back grounds in your solution files. • Use Math Type or Equation Editor etc for mathematical symbols. • You should remember that if we found the solution files of some students are same then we will reward zero marks to all those students. • Try to make solution by yourself and protect your work from other students, otherwise you and the student who send same solution file as you will be given zero marks. • Also remember that you are supposed to submit your assignment in Word format any other like scan images etc will not be accepted and we will give zero marks correspond to these assignments. Question No. 1: A particle of mass 5kg is placed on an inclined plane which makes an angle of 30o with the horizontal. Find the forces acting on the particle parallel and perpendicular to the plane. MARKS 10 Question No. 2: Find the magnitude of resultant of the forces shown in the figure. Also find the angle that the angle that the resultant makes with x-axis. MARKS 10 ![0_1592166851473_Screenshot_20200615-012739_Word.jpg](Uploading 100%)
MTH304 - Statics
MTH304 Assignment 3 Solution and Discussion
M
Q. 1 A non-uniform beam AB of length 8 m and mass 8 kg rests on a pivot at the mid-point C. When a mass of 2 kg rests on the beam 1.5 m from B, the system is in equilibrium. Find the distance between A and the centre of mass of the beam. Q. 2 A uniform rod AB of length 10 m and weight 5 N rests on two supports at B and C, where C is 1 m from A. A weight of 6 N is attached to the rod 2 m from A. Given that when a load is attached 0.5 m from A, the rod is on the point of tilting about C, Find the weight of this load in Newton.
MTH304 - Statics
MTH304 Assignment 2 Solution and Discussion
zareenZ
Assignment # 2 MTH304 (Fall 2019) Maximum Marks: 20 Due Date: 10 -12-2019 DON’T MISS THESE: Important instructions before attempting the solution of this assignment: • To solve this assignment, you should have good command over First 18 lectures. • Try to get the concepts, consolidate your concepts and ideas from these questions which you learned in first 18 lectures. • Upload assignments properly through LMS, No Assignment will be accepted through email. • Write your ID on the top of your solution file. • Don’t use colorful back grounds in your solution files. • Use Math Type or Equation Editor etc for mathematical symbols. • You should remember that if we found the solution files of some students are same then we will reward zero marks to all those students. • Try to make solution by yourself and protect your work from other students, otherwise you and the student who send same solution file as you will be given zero marks. • Also remember that you are supposed to submit your assignment in Word format any other like scan images etc will not be accepted and we will give zero marks correspond to these assignments. Question No. 1: Three coplanar forces of magnitudes FN, 12N and 10N act at a fixed point O and are in equilibrium. The directions of the forces are shown in the diagram. Find the values of and F. [image: z6UQUXq.png] MARKS 10 Question No. 2: A particle of mass 5kg is suspended by two strings. If these strings make angles of 30o and 45o with the horizontal, find the tensions in each string. MARKS 10
MTH304 - Statics
MTH304 Assignment 1 Solution and Discussion
zareenZ
Assignment # 1 MTH304 (Fall 2019) Maximum Marks: 20 Due Date: 17 -11-2019 DON’T MISS THESE: Important instructions before attempting the solution of this assignment: • To solve this assignment, you should have good command over First 10 lectures. • Try to get the concepts, consolidate your concepts and ideas from these questions which you learned in first 10 lectures. • Upload assignments properly through LMS, No Assignment will be accepted through email. • Write your ID on the top of your solution file. • Don’t use colorful back grounds in your solution files. • Use Math Type or Equation Editor etc for mathematical symbols. • You should remember that if we found the solution files of some students are same then we will reward zero marks to all those students. • Try to make solution by yourself and protect your work from other students, otherwise you and the student who send same solution file as you will be given zero marks. • Also remember that you are supposed to submit your assignment in Word format any other like scan images etc will not be accepted and we will give zero marks correspond to these assignments. Question No. 1: A particle of mass 10kg is placed on an inclined plane which makes and angle of with the horizontal. Find the resolved parts of the weight of the particle in the direction parallel and perpendicular to the plane. MARKS 10 Question No. 2: Two particles of mass 3kg each are connected by a light inextensible string which passes over a smooth fixed pulley, which is attached to a string C. The string C is hanging on the fixed support. The particles are at rest. Find the tension in the string C. MARKS 10
MTH304 - Statics

MTH304 Assignment 3 Solution and Discussion

Scheduled Pinned Locked Moved MTH304 - Statics
mth304assignment 3solutiondiscussionfall 2019
2 Posts 1 Posters 354 Views 1 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • M Offline
    M Offline
    moaaz
    Cyberian's Gold
    wrote on last edited by
    #1

    Q. 1
    A non-uniform beam AB of length 8 m and mass 8 kg rests on a pivot at the mid-point C. When a mass of 2 kg rests on the beam 1.5 m from B, the system is in equilibrium. Find the distance between A and the centre of mass of the beam.

    Q. 2
    A uniform rod AB of length 10 m and weight 5 N rests on two supports at B and C, where C is 1 m from A. A weight of 6 N is attached to the rod 2 m from A. Given that when a load is attached 0.5 m from A, the rod is on the point of tilting about C, Find the weight of this load in Newton.

    Discussion is right way to get Solution of the every assignment, Quiz and GDB.
    We are always here to discuss and Guideline, Please Don't visit Cyberian only for Solution.
    Cyberian Team always happy to facilitate to provide the idea solution. Please don't hesitate to contact us!
    %(red)[NOTE: Don't copy or replicating idea solutions.]

    How to Get Earning from Cyberian

    Quiz Copy Solution
    Mid and Final Past Papers
    Live Chat

    For instructions on how to use this Cyberian discussion board

    1 Reply Last reply
    0
    • M Offline
      M Offline
      moaaz
      Cyberian's Gold
      wrote on last edited by
      #2

      Q.1 Solution:
      55fbd96d-66e7-45e7-b7bd-a16e105c32ce-image.png
      Anti clockwise moment = Clockwise moment
      8gN * d = 2gN * 2.5m
      8d = 5Nm
      d = 5/8
      d = 0.625m
      = 4 – d
      = 4 – ( 0.625)
      = 3.375m

      Q. 2 Solution:
      2d8517b3-5885-4944-b418-04e787ef907d-image.png
      R = 0
      Taking moment about ‘C’
      w * 0.5 = 6 * 1N + 5 * 4m
      0.5w = 26Nm
      w = 26/0.5m
      w = 52 N

      Discussion is right way to get Solution of the every assignment, Quiz and GDB.
      We are always here to discuss and Guideline, Please Don't visit Cyberian only for Solution.
      Cyberian Team always happy to facilitate to provide the idea solution. Please don't hesitate to contact us!
      %(red)[NOTE: Don't copy or replicating idea solutions.]

      How to Get Earning from Cyberian

      Quiz Copy Solution
      Mid and Final Past Papers
      Live Chat

      For instructions on how to use this Cyberian discussion board

      1 Reply Last reply
      0

      Reply
      • Reply as topic
      Log in to reply
      • Oldest to Newest
      • Newest to Oldest
      • Most Votes


      How to Build a $1,000/Month PAK VS BAN Live Live Cricket Streaming
      File Sharing
      Earn with File Sharing

      0

      Online

      3.0k

      Users

      2.8k

      Topics

      8.1k

      Posts
      solution
      1235
      discussion
      1195
      fall 2019
      813
      assignment 1
      428
      assignment 2
      294
      spring 2020
      265
      gdb 1
      238
      assignment 3
      79
      • PM. IMRAN KHAN
        undefined
        4
        1
        4.0k

      • Are the vaccines halal or not?
        undefined
        4
        1
        3.8k

      • All Subjects MidTerm and Final Term Solved Paper Links Attached Please check moaaz past papers
        zaasmiZ
        zaasmi
        3
        26
        75.1k

      • CS614 GDB Solution and Discussion
        M
        moaaz
        3
        3
        8.1k

      • How can I receive Reputation earning from Cyberian? 100% Discount on Fee
        Y
        ygytyh
        3
        28
        23.9k
      | |
      Copyright © 2010-26 RUP Technologies LLC. USA | Contributors
      • Login

      • Don't have an account? Register

      • Login or register to search.
      • First post
        Last post
      0
      • Categories
      • Recent
      • Tags
      • Popular
      • Pro Blog
      • Users
      • Groups
      • Unsolved
      • Solved