Preparing for your Virtual University CS302 - Digital Logic Design Mid Term exam?
Searching for authentic and well-referenced CS302 MIDTERM Solved MCQs and Solved Subjective Papers? You’re in the right place!
We have gathered the best CS302 study material — MCQs and Subjectives solved with references — created by Moaaz and Asad, two of the most trusted contributors in the VU student community.
👉 Take Free Online CS302 Test Here
⸻
📚 Download CS302 Solved Mid Term Papers
Here’s the collection of CS302 MIDTERM preparation PDFs you can download and study from:
1️⃣ CS302 MIDTERM SOLVED MCQS WITH REFERENCES BY MOAAZ & ASAD.pdf
• Complete set of Solved MCQs.
• Each question is provided with a reference from the VU lecture slides or recommended textbooks.
• Topics covered include:
• Number Systems
• Boolean Algebra
• Logic Gates
• Karnaugh Maps (K-Maps)
• Combinational Circuits
• Sequential Circuits
• Flip-Flops
• Counters & Registers
2️⃣ CS302-MIDTERM SOLVED MCQS WITH REFERENCES BY MOAAZ & ASAD.pdf
• Another version of the same trusted MCQs pack.
• Includes additional verified MCQs.
• Excellent for cross-verifying concepts and maximizing your prep.
3️⃣ CS302-MIDTERM Solved Subjectives with References by Moaaz (1).pdf
• Solved Subjective Questions from past Mid Terms.
• References for each answer included.
• Covers commonly asked short questions and long questions.
4️⃣ CS302-MIDTERM Solved Subjectives with References by Moaaz.pdf
• Another version of Solved Subjective Papers.
• Cross-checked and updated.
• Great for last-minute revisions.
⸻
🎯 Why Study with These CS302 Resources?
✅ Verified content by Moaaz & Asad — trusted VU contributors.
✅ References included — easily cross-check with your course material.
✅ Focused on important and repeated questions.
✅ Save time — all material in one place.
✅ Boost your confidence before attempting the exam.
⸻
🚀 Study Tips for CS302 Mid Term
1. Download and read the Solved MCQs & Subjectives PDFs.
2. Attempt MCQs in exam mode on 👉 exam.cyberian.pk.
3. Understand the concepts behind each MCQ — don’t just memorize.
4. For Subjectives, practice writing full answers and verify with the provided references.
5. Focus on K-Maps, Boolean Simplification, and Flip-Flops — these are high-weightage topics.
⸻
Final Words
With this complete CS302 MIDTERM Solved MCQs & Subjective Papers package by Moaaz & Asad, you’ll be well-prepared to tackle your exam with confidence.
👉 Don’t forget to practice online 👉 http://exam.cyberian.pk/
📥 Download the PDFs now and start your preparation today!
✨ Good luck with your CS302 Mid Term exam! ✨
⸻
SEO Keywords:
• CS302 MIDTERM Solved MCQs PDF
• CS302 MIDTERM Subjective Papers with References
• CS302 Moaaz & Asad Solved Papers
• CS302 Past Papers Solved MCQs & Subjectives
• Download CS302 Solved MCQs and Subjective Questions
• CS302 Digital Logic Design Exam Preparation
• CS302 Online Test Practice
⸻
Would you like me to provide these next? 🚀
Re: CS302 GDB1 Solution and discussion
Total Marks 5
Starting Date Thursday, February 18, 2021
Closing Date Friday, February 19, 2021
Status Open
Question Title PAL vs PLA - Gaded Discussion Board (GDB)
Question Description
CS302 – Digital Logic Design
Graded Discussion Board
Suppose you had reduced a 32-variable Boolean expression using Quine–McCluskey algorithm to a 12-variable expression. For the generated simplified expression, you are required to implement it into a digital logic circuit. You can only use Programmable Array Logic (PAL) or Programmable Logic Array (PLA) devices.
Assume that we had selected a Programmable Array Logic (PAL) and a Programmable Logic Array (PLA) for you to choose between.
Using TICPAL22V10Z-25C (Programmable Array Logic)
Using PLUS173–10 (Programmable Logic Array).
Your selections among stated PLA and PAL must consider the following constraints:
Complexity
Flexibility
Speed
Functionality
Cost
Important instructions for GDB submission:
You must provide a precise and to the point answer. Your answer should be no more than 5 to 6 lines and do avoid irrelevant details.
Post your answer on the Graded Discussion Board (GDB), GDB through email or MDB will not be accepted in any case.
GDB will only be open for 48 hours, no more time or grace day will be provided.
Any answers copied from the internet or other student will get zero marks.
Re: CS302 Assignment 2 Solution and Discussion
Digital Logic Design (CS302)
Assignment # 02
Total marks = 20
Deadline Date
15/06/2020
Please carefully read the following instructions before attempting assignment.
RULES FOR MARKING
It should be clear that your assignment would not get any credit if:
The assignment is submitted after the due date.
The submitted assignment does not open or file is corrupt.
Strict action will be taken if submitted solution is copied from any other student or from the internet.
You should concern the recommended books to clarify your concepts as handouts are not sufficient.
You are supposed to submit your assignment in .doc or docx format.
Any other formats like scan images, PDF, zip, rar, ppt and bmp etc will not be accepted.
Topic Covered:
• SOP to POS Conversion
• K-Map
NOTE
No assignment will be accepted after the due date via email in any case (whether it is the case of load shedding or internet malfunctioning etc.). Hence refrain from uploading assignment in the last hour of deadline. It is recommended to upload solution file at least two days before its closing date.
If you people find any mistake or confusion in assignment (Question statement), please consult with your instructor before the deadline. After the deadline no queries will be entertained in this regard.
For any query, feel free to email at:
cs302@vu.edu.pk
Questions No 01 Marks (10)
Map the given table on K-map. Make relevant pairs and find simplified SOP expression.
A B C D E Output
0 0 0 0 0 1
0 0 0 0 1 1
0 0 0 1 0 1
0 0 0 1 1 0
0 0 1 0 0 1
0 0 1 0 1 1
0 0 1 1 0 X
0 0 1 1 1 0
0 1 0 0 0 0
0 1 0 0 1 X
0 1 0 1 0 1
0 1 0 1 1 1
0 1 1 0 0 X
0 1 1 0 1 0
0 1 1 1 0 1
0 1 1 1 1 X
1 0 0 0 0 1
1 0 0 0 1 0
1 0 0 1 0 X
1 0 0 1 1 0
1 0 1 0 0 1
1 0 1 0 1 1
1 0 1 1 0 0
1 0 1 1 1 0
1 1 0 0 0 0
1 1 0 0 1 X
1 1 0 1 0 0
1 1 0 1 1 1
1 1 1 0 0 0
1 1 1 0 1 X
1 1 1 1 0 0
1 1 1 1 1 1
Questions No 02 Marks (10)
Map the given canonical sum (SOP) on K-Map. Pair the terms of canonical product (POS) and find simplified POS expression.
Canonical Sum = ∑A, B, C, D (1, 2, 5, 6, 8, 10, 11, 13, 14, 15)
Digital Logic Design (CS302)
Assignment # 01
Total marks = 20
Deadline:01-06-2020
Please carefully read the following instructions before attempting assignment.
RULES FOR MARKING
It should be clear that your assignment would not get any credit if:
The assignment is submitted after the due date.
The submitted assignment does not open or file is corrupt.
Strict action will be taken if submitted solution is copied from any other student or from the internet.
You should concern the recommended books to clarify your concepts as handouts are not sufficient.
You are supposed to submit your assignment in .doc or docx format.
Any other formats like scan images, PDF, zip, rar, ppt and bmp etc will not be accepted.
Topic Covered:
Number Systems
Octal number
BCD Numbers
Lectures Covered
Lecture 01- 06
NOTE
No assignment will be accepted after the due date via email in any case (whether it is the case of load shedding or internet malfunctioning etc.). Hence refrain from uploading assignment in the last hour of deadline. It is recommended to upload solution file at least two days before its closing date.
If you people find any mistake or confusion in assignment (Question statement), please consult with your instructor before the deadline. After the deadline no queries will be entertained in this regard.
For any query, feel free to email at:
cs302@vu.edu.pk
Questions No 01 Marks (05)
Perform decimal to binary conversion on given decimal number using Sum-of-weights method. Verify the answer using repeated division method.
Decimal Number=1050
Questions No 02 Marks (10)
Perform the following arithmetic operations. For conversion you can use indirect method of conversion only.
〖(E2BC3F)〗_16-(10110101000000011110001)_2+ (537476217)_8 =(________)_16
Questions No 03 Marks (05)
Perform BCD addition between these two numbers. Kindly perform all the steps.
46
37
Digital Logic Design (CS302)
Assignment # 03
Total marks = 20
Deadline Date
27/01/2020
Please carefully read the following instructions before attempting assignment.
RULES FOR MARKING
It should be clear that your assignment would not get any credit if:
The assignment is submitted after the due date.
The submitted assignment does not open or file is corrupt.
Strict action will be taken if submitted solution is copied from any other student or from the internet.
You should concern the recommended books to clarify your concepts as handouts are not sufficient.
You are supposed to submit your assignment in .doc or docx format.
Any other formats like scan images, PDF, zip, rar, ppt and bmp etc will not be accepted.
Topic Covered:
• State Diagram
• Counters
• K-Maps
• Circuit Design
NOTE
No assignment will be accepted after the due date via email in any case (whether it is the case of load shedding or internet malfunctioning etc.). Hence refrain from uploading assignment in the last hour of deadline. It is recommended to upload solution file at least two days before its closing date.
If you people find any mistake or confusion in assignment (Question statement), please consult with your instructor before the deadline. After the deadline no queries will be entertained in this regard.
For any query, feel free to email at:
cs302@vu.edu.pk
Questions No 01 Marks (20)
You are required to design a 4-bit even up-counter using D flip flop by converting combinational circuit to sequential circuit. The counter will only consider even inputs and the sequence of inputs will be 0-2-4-6-8-10-0.
You are required to perform following tasks:
Draw the State diagram.
Generate State & Transition Table.
Generate simplified Boolean Expression.
Design the final Circuit diagram.
Digital Logic Design (CS302)
Assignment # 02
Total marks = 20
Deadline Date
27 Nov 2019
Please carefully read the following instructions before attempting assignment.
RULES FOR MARKING
It should be clear that your assignment would not get any credit if:
The assignment is submitted after the due date.
The submitted assignment does not open or file is corrupt.
Strict action will be taken if submitted solution is copied from any other student or from the internet.
You should consult the recommended books to clarify your concepts as handouts are not sufficient.
You are supposed to submit your assignment in .doc or docx format.
Any other formats like scan images, PDF, zip, rar, ppt and bmp etc will not be accepted.
Topic Covered:
Expression Simplification
Quine-McCluskey Simplification Method
NOTE
No assignment will be accepted after the due date via email in any case (whether it is the case of load shedding or internet malfunctioning etc.). Hence refrain from uploading assignment in the last hour of deadline. It is recommended to upload solution file at least two days before its closing date.
If you people find any mistake or confusion in assignment (Question statement), please consult with your instructor before the deadline. After the deadline no queries will be entertained in this regard.
For any query, feel free to email at:
cs302@vu.edu.pk
Question Marks (20)
Consider the below given canonical sum:
∑_(A,B,C,D,E)▒〖(2,4,6,8,10,12,14,16,18,20,22,24,26,28,30)〗
Write the SOP expression for the given sum.
Find the prime implicants from given minterms using Quine-McCluskey simplification method.
Extract the simplified expression.
Note: Perform all steps of this method. In case of missing steps, marks will be deducted.
In circuit designing industry, the focus is on transistor density, clock speed and power/performance ratio optimization. Due to the emergence of Dark Silicon issue, the focus has shifted entirely on power/performance ratio. Performance and power tradeoff is still the most crucial issue in the design of circuits. Suppose you are working on the design of a processor for a Radar System. Which one of the parameters (Performance or Power) will you consider being the most important in this situation?
Justify your answer with good reasons.
CS302 GDB1 Solution and discussion
-
In circuit designing industry, the focus is on transistor density, clock speed and power/performance ratio optimization. Due to the emergence of Dark Silicon issue, the focus has shifted entirely on power/performance ratio. Performance and power tradeoff is still the most crucial issue in the design of circuits. Suppose you are working on the design of a processor for a Radar System. Which one of the parameters (Performance or Power) will you consider being the most important in this situation?
Justify your answer with good reasons.
-
-
The large energy cost of memory fetches limits the overallefficiency of applications no matter how efficient the ac-celerators are on the chip. As a result the most importantoptimization must be done at the algorithm level, to reduce off-chip memory accesses, to createDark Memory. The algorithmsmust first be (re)written for both locality and parallelism beforeyou tailor the hardware to accelerate them.Using Pareto curves in theenergy/opandmm2/(op/s)spaceallows one to quickly evaluate different accelerators, memorysystems, and even algorithms to understand the trade-offsbetween performance, power and die area. This analysis isa powerful way to optimize chips in the Dark Silicon era.
PAK VS BAN Live
File Sharing
