Skip to content
  • 0 Votes
    6 Posts
    2k Views
    zaasmiZ
    Since you are looking for the detailed content of that CS507 (Information Systems) assignment, here is the structured solution for the two main questions typically found in that Spring 2019 file. Question 1: System Development Methodology The assignment asks why a structured methodology is needed for system development and identifies the Critical Success Factors. Three Critical Success Factors: Standardization of Procedures: A methodology provides a repeatable, predictable process. It ensures that every team member follows the same “roadmap,” reducing confusion and errors. Management Control: By breaking the project into phases (like Planning, Analysis, and Design), managers can set milestones and track progress more effectively. User Involvement: A good methodology ensures that users are consulted at every stage, preventing the development of a system that “works” but doesn’t actually meet the business needs. Question 2: The Incremental Model The second part of the assignment focuses on the Incremental Model, where the system is developed and delivered in small pieces (increments). Characteristics of the Incremental Model: Iterative Design: Each increment adds functional power to the preceding increment. Priority-Based: The most important features are built and delivered in the first increment. Parallelism: Different teams can work on different increments simultaneously once the core architecture is set. Pros and Cons Table Advantages (Pros) Disadvantages (Cons) Generates working software quickly. Requires a very clear and complete definition of the whole system before it can be broken down. Easier to test and debug within a smaller iteration. Total cost can be higher than the Waterfall model. More flexible; the cost of changing requirements is lower. Requires heavy planning to ensure the “pieces” fit together at the end. Question 3: Strategic Planning for Information Systems Often, CS507 assignments from this period ask about the Level of Planning. Strategic Planning: Done by top-level management (long-term goals, 3–5 years). Tactical Planning: Done by middle management (implementing the strategy, 1–2 years). Operational Planning: Done by low-level supervisors (daily/weekly tasks). Would you like me to explain the specific steps for creating an Entity Relationship Diagram (ERD) if your assignment requires a visual model?
  • 0 Votes
    28 Posts
    19k Views
    zareenZ
    The objective of a transportation problem is to develop an ----------- transportation schedule that meets all demand from given stock at a ------- total shipping cost. MTH601 (integral, maximum)
  • 0 Votes
    23 Posts
    14k Views
    zaasmiZ
    Hypothesis space uses the ________________ of the attributes. CS607 conjunctions (AND) (Page No 168) [image: 1565096437598-91bd86e3-fba3-4132-885c-4bb3c224f37f-image.png]
  • CS609 GDB.1 Solution and Discussion

    Unsolved CS609 - System Programming cs609 solution gdb no.1
    1
    0 Votes
    1 Posts
    736 Views
    No one has replied
  • 0 Votes
    5 Posts
    3k Views
    zaasmiZ
    Answer will be same after convert. [image: 1564758814304-84e0807a-616d-4c42-84a2-4f63289e5a4a-image.png] [image: 1564758789133-4476461b-9e74-4125-ad00-78dac6fb19df-image.png]
  • 1 Votes
    16 Posts
    6k Views
    mehwishM
    @zareen said in CS609 Quiz No.2 Solution and Discussion: What are the 3 types of viruses? Resident Virus. Resident viruses live in your RAM memory. … Multipartite Virus. … Direct Action Virus. … Browser Hijacker. … Overwrite Virus. … Web Scripting Virus. … Boot Sector Virus. … Macro Virus.
  • 0 Votes
    30 Posts
    5k Views
    zaasmiZ
    said in MGT301- Quiz 1 Solution and Discussion: Company B is an internet service provider company and it has launched two different packages which charge a fixed and some variable rates according to usage in a month. Company B is using which type of product mix pricing strategies? MGT301 In MGT301, the pricing strategy where a company charges a fixed base fee plus a variable usage rate is known as Two-Part Pricing. This is a specific form of Captive-Product Pricing applied to services. How Two-Part Pricing Works Company B breaks its price into two distinct components: Fixed Fee: A flat rate paid regardless of usage (e.g., a monthly subscription or “line rent”). Variable Usage Rate: An additional charge based on the number of units consumed (e.g., GBs of data used, minutes spent on calls, or extra bandwidth). Comparison with other Product Mix Strategies To ensure you aren’t confusing this with other strategies mentioned in your course, here is how it compares: Strategy Definition Example Two-Part Pricing Service consists of a fixed fee plus a variable usage rate. Internet (Base fee + excess data charges); Amusement parks (Entry fee + per-ride fee). Captive-Product Pricing a main physical product low and its required supplies high. Razors (main) and Blades (captive). Optional-Product Pricing optional accessories sold along with the main product. Buying a laptop and choosing to add a separate mouse or bag. Product Bundle Combining several products and offering the set at a reduced price. Internet + Cable TV + Phone line package. Managerial Strategy in MGT301 In service industries, the challenge for a marketer is deciding the balance between the two parts: If the Fixed Fee is too high, customers may not sign up (lowers penetration). If the Variable Rate is too high, customers may limit their usage, reducing the company’s total revenue. The goal is to set the fixed fee low enough to induce people to use the service, and the variable rate to capture profit from heavy users. Would you like me to explain how “Product Bundle Pricing” differs when Company B offers Internet and Television together for a single price?
  • 0 Votes
    4 Posts
    1k Views
    cyberianC
    @moaaz Another Idea solution #include <bios.h> #include <dos.h> FILE *fp; unsigned char buf[1024]; unsigned char st[60]; unsigned char headno[10]; unsigned char secno[10]; unsigned char trackno[10]; void main (void) { int i; for (i=0; i<1024; i++) buf[i]=0; gets(st); fp=fopeon(st,”wb”); printf(“Head”); gets(headno); puts(headno); printf(“/nsector ”); gets(secno); puts(secno); printf(“/ntrack ”); gets(trackno); puts(trackno); i = biosdisk(2, 0x80, atoi(headno), atoi(trackno), atoi(trackno), 2,buf); } if(*(((char *)(&i))+1)= =0) { fwrite(buf,2,1024,fp); fclose(fp); } else { printf(“Cannot Read Error# = %x” i); }
  • 0 Votes
    23 Posts
    15k Views
    zareenZ
    Who did move the resolution in Delhi Convention for a separate state? Hussain Shaheed Suharwardy Maulana Abdul Kalam Azad Quaid-e-Azam Sardar Abdurrab Nishtar Why was The Simla Conference of 1945 failed? Because of Overconfidence by the Congress leaders Coldness by F.M. Lord Wavell the Viceroy of India The criticle approach about Muslims by the Hindu Press Due to Quaid-e-Azam’s demand to have all the Muslim seats to be allocated to the Muslim League When the title of Sir was conferred to Allama Iqbal? In, 1916 In,1922 In, 1932 Which political party formed its govt in NWFP after the elections of 1945-46? Muslim league with the support of Unionist party Unionist party with the support of Congress Khudai Khidmatgar with the support of Congress Congress with the support of Unionist party Which document reflected the aspirations of every Muslim living in India? Lucknow Pact Delhi Proposals Nehru Report Jinnah’s Fourteen Points Which party formed government in NWFP after the elections of 1937? Unionist Party Khudai Khidmat gar party United Party Muslim League For whom the term “AKALIS” was used in 1945? The members of Khudai Khidmatgar Party The members of Khizar Hayat Tiwana group The members of Unionist Party in Punjab The participants in the Delhi Convention When did Chaudhry Rehmat Ali write “Now or Never”? In, 1930 In, 1931 In, 1932 In, 1933 When was Delhi Convention held by the Muslim League elected members? March, 1945 April, 1946 May, 1944 March, 1946 “Adjacent units where Muslims are in a majority, as in Northwest and East, should be constituted as Independent States where the constituent units will be autonomous and sovereign”. Which document this text belongs to? Allama Iqbal Allahabad Address 1930 The Lahore Resolution 1940 Fourteen Points of Jinnah, 1929 Delhi Proposals, 1927
  • 0 Votes
    3 Posts
    1k Views
    cyberianC
    Q.2 Answer Guy de Maupassant’s “The Devil” story shows that hardship causes individuals to engage in extreme actions. To this end, in a bid to prevent loss of money, La Rapet hastens the death of Mother Bontemps. Likewise, to make ends meet, the ninety-two-year-old Mother Bontemps works for ten hours every day. Similarly, poverty causes Honore Bontemps to wish that Mother Bontemps dies in not more than three days. This essay highlights that hardship causes individuals to engage in extreme actions based on the following aspects: in a bid to prevent loss of money, La Rapet hastens the death of Mother Bontemps; in a bid to make ends meet, the ninety-two-year-old Mother Bontemps works for ten hours every day; and Honore Bontemps wishes that Mother Bontemps will die in not more than three days. Given that, in a bid to prevent loss of money, La Rapet hastens the death of Mother Bontemps, “The Devil” illustrates that hardship causes individuals to engage in extreme actions. In this regard, La Rapet is afraid that if Mother Bontemps does not die quickly, she will end up working for less than the six francs promised by Honore Bontemps. Honore Bontemps has promised that, if La Rapet looks after Mother Bontemps until Mother Bontemps dies, Honore Bontemps will pay La Rapet a sum of six francs. Assuming that Mother Bontemps will die in less than three days, La Rapet accepts Honore Bontemps’ offer. By the second day, Mother Bontemps does not show signs of dying soon. Mother Bontemps’ resilience prompts La Rapet to hatch a drastic plan; she frightens Mother Bontemps such that Mother Bontemps dies. This way, La Rapet is able to make a profit from the six francs payment given by Honore Bontemps (Maupassant, Read More
  • 1 Votes
    15 Posts
    6k Views
    zaasmiZ
    SNOBOL was created specifically for text and string manipulation
  • 0 Votes
    20 Posts
    12k Views
    cyberianC
    @Zain-Sports please ready discussion and get solution not only for get it easy!
  • 0 Votes
    15 Posts
    4k Views
    zaasmiZ
    [image: 1558617307828-9f5810eb-0c32-4205-8f2b-894e50cfa5b1-image.png] [image: 1558617437644-93c64ca9-1ff9-475b-8be6-96cfe6a4fc60-image.png] [image: 1558617576969-a762131e-cb91-48d1-a6c8-bac370387520-image.png] [image: 1558617673733-e8e167c2-502e-4cf7-8562-9a1890246115-image.png] [image: 1558617765742-12cb9b85-379a-4e3d-b101-ac53c91f692c-image.png] [image: 1558617822419-abb5cfcf-2123-4e2d-9520-6849c2db7577-image.png] [image: 1558617871761-543f71b6-cf6a-4203-9efb-a858b05c0adb-image.png] [image: 1558618065358-714b0213-3a82-4bfd-a2e9-be71dd503c49-image.png] [image: 1558618086562-4c8d94cc-265b-49a3-8f9d-e556b10ba69e-image.png] [image: 1558618160374-be408044-865b-4532-a90b-a8fc1862d363-image.png]
  • 0 Votes
    3 Posts
    818 Views
    zaasmiZ
    https://youtu.be/eZXuoeTGuuU
  • 1 Votes
    2 Posts
    764 Views
    cyberianC
    CS604 Assignment solution Spring 2019 Answer: 1 ¥ cd ¥ cd/personal ¥ Cd~/courses/cs604 ¥ ls ¥ mkdir “programs” Sr # List of Operations Directory 1 To contain the devices available to Linux /dev 2 Used for mounting temporary file systems /mnt 3 To store system configuration files /etc 4 For the storage of large applications packages /opt 5 To store shared libraries and kernel modules /lib Answer: 2
  • 0 Votes
    2 Posts
    999 Views
    cyberianC
    Q1. Solution Requirement Most suitable topology No of links required 1 Mesh Topology 78 2 star Topology 13 3 Bus Topology 12 4 Ring Topology 13
Reputation Earning
How to Build a $1,000/Month World CUP LIVE Matches Live Cricket Streaming
Ads
File Sharing
Stats

0

Online

3.0k

Users

2.8k

Topics

8.5k

Posts
Popular Tags
Online User
| |