Skip to content
  • 0 Votes
    2 Posts
    2k Views
    zaasmiZ
    @Jawad-Ahmad said in ubnt ap cp sync but link not working: If an Ubiquiti UniFi AP is syncing with the controller but the link isn’t working (no connection to the network), it usually indicates a problem with the physical connection or the AP’s network configuration. Troubleshooting steps include checking the physical link, verifying the AP’s IP address and subnet, and ensuring the controller can reach the AP. Troubleshooting Steps: Check the Physical Connection: Ethernet Cable: Ensure the ethernet cable connecting the AP to the network (or PoE adapter) is securely plugged in at both ends and not damaged. PoE: If using Power over Ethernet (PoE), verify the PoE injector or switch is providing power and that the cable connected to the AP is working. Link Light: Check for a link light on both the AP and the switch/injector port. If there is no link light, the issue is likely a bad cable, PoE injector, or a problem with the AP’s Ethernet port. Verify Network Configuration: IP Address: Ensure the AP is assigned an IP address within the correct subnet for your network. Subnet Mask: Verify the subnet mask is correct for the AP’s IP address. Gateway: Confirm the AP has the correct default gateway address (usually the router’s IP). Controller IP: Ensure the AP can reach the UniFi controller. If using layer 3 adoption, the controller IP may need to be configured on the AP or through a DNS record. Controller Connectivity: Adopt/Re-adopt: Try re-adopting the AP in the UniFi controller software. Reset AP: If re-adoption fails, consider resetting the AP to factory defaults (using the reset button) and then re-adopting it. Firewall and Antivirus: Temporarily Disable: If other troubleshooting steps fail, temporarily disable any firewalls (including Windows Firewall) or antivirus software that might be blocking communication between the AP and the controller. Topology Issues: STP Root: If you have a complex network with VLANs, check the spanning tree protocol (STP) root settings, as incorrect settings can cause connectivity issues. Topology Map: In the UniFi controller’s topology map, ensure the AP’s connection type is correctly identified (e.g., wired vs. wireless). If it’s showing a wireless connection when it should be wired, it might indicate a problem with the topology information. Firmware and Software: Controller Version: Ensure the UniFi controller software is up to date. AP Firmware: Ensure the AP’s firmware is also up to date. If you continue to have problems, provide more details about your network setup, including: What type of UniFi AP is it? What is the current IP address, subnet mask, and gateway of the AP? Is the AP connected directly to a UniFi switch, or is there a PoE injector involved? What is the topology of your network (e.g., are there VLANs)? Are you using layer 3 adoption? With more information, it will be easier to diagnose and resolve the specific issue.
  • 0 Votes
    2 Posts
    2k Views
    cyberianC
    @zarry said in ERROR Command "cashier:install" is not defined. Did youmean one of these?: ERROR Command “cashier:install” is not defined. Did youmean one of these? ⇂ cashier:webhook ⇂ fortify:install ⇂ jetstream:install ⇂ migrate:install ⇂ migrate:install After installing the package, publish Cashier’s migrations using the vendor:publish Artisan command: php artisan vendor:publish --tag="cashier-migrations"
  • 0 Votes
    4 Posts
    2k Views
    cyberianC
    @Thc-Vape said in Failed to connect to php.new: zsh: command not found: npm The error “zsh: command not found: npm” in your zsh terminal means the system cannot locate the npm executable. This typically happens when npm is installed but not in your shell’s PATH environment variable, or if Node.js (which includes npm) is not installed or not correctly configured. To resolve this, you can either add the npm directory to your PATH or reinstall Node.js and npm. Troubleshooting Steps: Verify Node.js and npm Installation: Open your terminal and type node -v and npm -v. If you see version numbers, it means Node.js and npm are installed. If you get “command not found”, proceed to install Node.js and npm using your system’s package manager (e.g., brew install node on macOS with Homebrew) or from the official website.
  • 0 Votes
    9 Posts
    4k Views
    zaasmiZ
    @zaasmi said in how to show hidden files in mac?: @rana-rana said in how to show hidden files in mac?: in mac while compressing files .ds_store When compressing files on a Mac, .DS_Store files are automatically included, but can be excluded. To exclude them, use the -x flag with the zip command in Terminal, specifying .DS_Store as the file to exclude. Alternatively, third-party tools like BetterZip or CleanArchiver can be used to create archives without .DS_Store files. Here’s a more detailed explanation: Understanding .DS_Store Files: .DS_Store files are created by macOS Finder to store custom attributes of a folder, such as icon positions, background images, and window sizes, according to Super User. These files are specific to macOS and can cause issues when sharing archives with users on other operating systems. Methods for Excluding .DS_Store Files: Using the zip command in Terminal: To exclude .DS_Store files, use the -x flag with the zip command. For example: zip -r archive_name.zip directory_to_zip -x "*.DS_Store". This command will create a zip archive of the specified directory, excluding any .DS_Store files. 2. Using third-party tools: Several third-party tools, like BetterZip and CleanArchiver, can create archives while automatically excluding .DS_Store files. 3. Automator: Automator can be used to create a service that compresses folders and automatically removes .DS_Store files. 4. Setting Archive Utility settings: You can configure Archive Utility to always output zip files to a specific folder with folder actions enabled to automatically remove .DS_Store files. By using these methods, you can ensure that your compressed archives do not include .DS_Store files, making them more compatible with other operating systems and preventing potential issues. zip -d filename.zip __MACOSX .DS_Store
  • 0 Votes
    3 Posts
    2k Views
    zaasmiZ
    In that case, this would be an issue with the Plugin Check plugin, not with this GitHub Action. Issues with the plugins hould be reported at https://github.com/WordPress/plugin-check/.
  • 0 Votes
    4 Posts
    2k Views
    zaasmiZ
    @full-stack said in Error: API error: Expect Google\Protobuf\Value.: Error: Server configuration error: Google Cloud SDK not properly installed The “Error: Server configuration error: Google Cloud SDK not properly installed” message typically indicates a problem with the Cloud SDK installation on your system. This can stem from various issues, including incorrect Python configuration, firewall restrictions, or conflicts with existing installations. To resolve this, ensure you have a compatible Python version, check your firewall settings, and consider reinstalling the SDK with proper configuration. Here’s a more detailed breakdown of potential causes and solutions: Python Configuration Issues: Incompatible Python Version: Cloud SDK has specific Python version requirements (e.g., Python 3.5-3.7, 2.7.9 or higher). Ensure your system has a compatible Python version installed and that the CLOUDSDK_PYTHON environment variable points to the correct executable. Incorrect Python Path: The CLOUDSDK_PYTHON variable should point to the Python executable, not just the directory. Python Conflicts: If you have multiple Python installations, especially older versions, it can lead to conflicts. Consider removing or disabling older Python versions. Firewall and Proxy Issues: Firewall Restrictions: Your firewall might be blocking access to necessary components during installation. Ensure that dl.google.com is allowed in your firewall rules, especially if you are behind a proxy. Proxy Configuration: If you’re behind a proxy, configure the http_proxy and https_proxy environment variables correctly, ensuring they use HTTP and not HTTPS. Installation Problems: Existing Installations: If you have previously installed the Cloud SDK, it might be helpful to remove the old installation directory before reinstalling. Installation Path: Avoid spaces in the installation path for the SDK and Python. Installation Method: Consider using the self-contained versioned archives if you are behind a proxy or firewall. Component Manager Issues: If the Cloud SDK component manager is disabled, it might be due to installing the SDK through another package manager. Troubleshooting Steps: Verify Python Installation: Use python --version or python3 --version to check your Python version and ensure it’s compatible. Check CLOUDSDK_PYTHON: Use echo $CLOUDSDK_PYTHON and declare -p CLOUDSDK_PYTHON to verify the environment variable is set correctly. Inspect Firewall: Check your firewall settings to ensure access to dl.google.com. Reinstall the SDK: If other solutions don’t work, try reinstalling the Cloud SDK, following the official documentation and considering the points above. Update gcloud CLI: Ensure you are using the latest version of the gcloud CLI. Consult Documentation: Refer to the official Google Cloud SDK documentation for detailed installation and troubleshooting instructions. By systematically addressing these potential issues, you should be able to resolve the “Server configuration error” and successfully install the Google Cloud SDK.
  • 0 Votes
    15 Posts
    4k Views
    zaasmiZ
    The Israeli attacks may not only be aimed at the nuclear program, but also at overthrowing the Iranian government, Hugo Bachega, Middle East correspondent in Jerusalem After Iran’s attacks on Israel, Iranian citizens gathered in Tehran’s Revolution Square and celebrated the launch of ballistic missiles at Israel. Iranians waved flags of Iran, Palestine and Hezbollah in addition to Iran. ,Image captionAfter Iran’s attacks on Israel, Iranian citizens gathered in Tehran’s Revolution Square and celebrated the launch of ballistic missiles at Israel. Iranians waved flags of Iran, Palestine and Hezbollah in addition to Iran. When Iran launched another wave of attacks before dawn, loud explosions were heard in Jerusalem and air defense systems were activated. When Israeli officials yesterday declared the operation against Iran a “success,” they also signaled that the attacks could be the beginning of a long campaign and warned the public that large-scale Iranian retaliation was expected. Israel says the campaign is aimed at damaging Iran’s nuclear program. Israeli officials believe Iran is currently in a vulnerable position. Its air defenses have been hit by airstrikes in the past year and its regional allies, particularly Hezbollah in Lebanon, have suffered heavy losses. Israeli officials say there is now an “opportunity” to act. However, the intensity of the attacks suggests something else: the goal may not just be to damage nuclear facilities but to topple the Iranian regime. Last night, Israeli Prime Minister Benjamin Netanyahu released a video message in which he directly addressed the Iranian people, urging them to rise up against their leadership. “The aim of the Israeli military operation is not only to eliminate the nuclear threat, but also the ballistic missile threat. And while we are achieving our goals, we are also paving the way for your goal of freedom.” This is perhaps the most worrying thing for the Iranian leadership, whose top priority has always been to ensure the survival of the regime. They are now under intense pressure and it is difficult to say whether these attacks will spark internal instability or an anti-government movement.
  • 0 Votes
    1 Posts
    1k Views
    No one has replied
  • 0 Votes
    2 Posts
    2k Views
    zaasmiZ
    The error ServiceWorker registration error name: “InvalidStateError” typically occurs when attempting to register a Service Worker in a context or state that doesn’t support it. Here’s what it means and how to fix it: ⸻ 🔍 What Does InvalidStateError Mean? This error happens when: • You try to register a Service Worker on a non-secure origin (HTTP instead of HTTPS). • You attempt to register it outside the main thread or in an invalid lifecycle phase. • The browser is in a state where the Service Worker can’t be installed (e.g., page not fully loaded). ⸻ ✅ Checklist to Fix the Issue 1. Use HTTPS Service Workers only work over HTTPS, except on localhost (which is allowed for development). ✅ Make sure your site is served over https://. 2. Correct Path Check that the path to your service-worker.js file is correct and accessible. navigator.serviceWorker.register('/service-worker.js') Register After Page Load Always register the Service Worker after the load event or when DOMContentLoaded has fired: window.addEventListener('load', () => { navigator.serviceWorker.register('/service-worker.js') .then(reg => console.log('SW registered', reg)) .catch(err => console.error('SW registration failed', err)); }); Same Origin Policy Ensure your service-worker.js is on the same origin as your page. Cross-origin SWs are not allowed. 5. Browser Support Verify you’re using a browser that supports Service Workers. ⸻ 🛠 Example Fixed Code if ('serviceWorker' in navigator) { window.addEventListener('load', function () { navigator.serviceWorker.register('/service-worker.js') .then(function (registration) { console.log('ServiceWorker registration successful with scope: ', registration.scope); }, function (err) { console.error('ServiceWorker registration failed: ', err); }); }); } ⸻ ❓Still Not Working? If you’re still seeing the error, share: • The registration code. • The URL you’re running it on. • The browser and version. I can help troubleshoot it further!
  • 0 Votes
    1 Posts
    2k Views
    No one has replied
  • 0 Votes
    5 Posts
    3k Views
    eman fathmaE
    Mid Term Paper CS301 MIDTERM SOLVED MCQS WITH REF. BY MOAAZ_ IRFAN & AWAIS.pdf CS301 MIDTERM SUBJECTIVE SOLVED WITH REFRENCES BY MOAAZ & AWAIS.pdf CS301-MIDTERM SOLVED MCQS WITH REF. BY MOAAZ_ IRFAN & AWAIS.pdf CS301-MIDTERM SUBJECTIVE SOLVED WITH REFRENCES BY MOAAZ & AWAIS.pdf
  • 0 Votes
    6 Posts
    3k Views
    Izhar AhmadI
    Updated links CS201 quiz_1. Solved with reference Date 15.5.14. by Masoom Fairy.pdf CS201- midterm solved mcqs with references by Moaaz and Asad.pdf CS201-midterm subjectives solved with references by moaaz.pdf
  • 0 Votes
    1 Posts
    2k Views
    No one has replied
  • 3 Votes
    26 Posts
    75k Views
    zaasmiZ
    Download ACC501 All Solved Mid Term MCQs, Quizzes & Current Papers PDF | Virtual University Are you preparing for your Virtual University (VU) ACC501 - Business Finance Mid Term exams? Look no further! We’ve compiled a complete package of ACC501 Solved MCQs, Quizzes, and Current Papers to help you ace your exams with confidence. 👉 Take Free Online Test for ACC501 Here ⸻ 📚 What You’ll Get in This Post We have gathered the most valuable study resources from top VU student communities. These PDFs are packed with solved MCQs and quiz questions from previous exams to help you practice and understand key concepts. Here are the downloadable files: 1️⃣ ACC501All_Solved_Mid_Term_MCQs.pdf • Comprehensive collection of solved Mid Term MCQs. • Sourced from VU Students community. • Covers important topics from the entire syllabus. 2️⃣ ACC501 Quiz 1 to 20 Solved Conf by Cyberian.pdf • Solved quizzes from 1 to 20. • Verified and updated by Cyberian experts. • Great for practicing quiz-based questions. 3️⃣ ACC501 Quizez before MID TERMs.pdf • Exclusive collection of quizzes before Mid Terms. • Perfect for last-minute revision. • Frequently repeated questions included. 4️⃣ ACC501 SolvedCurrentPapersMcqs200.pdf • 200+ solved MCQs from current papers. • Collected from latest exam sessions. • Increases your chances of scoring high. ⸻ 🎯 Why Use These ACC501 Resources? ✅ Time-saving – No need to browse multiple websites for scattered resources. ✅ Reliable content – Collected from trusted VU communities like . ✅ Updated material – Includes questions based on the most recent Mid Term exams. ✅ Boost confidence – Practice using real exam questions and sharpen your knowledge. ⸻ 🚀 How to Practice Effectively? 1. Download the PDFs and go through each solved question. 2. Attempt to answer the MCQs yourself first before seeing the solution. 3. Use the online test platform exam.cyberian.pk for a realistic test environment. 4. Focus on understanding the logic behind each answer to retain the concepts better. 5. Revise frequently asked questions multiple times for perfection. ⸻ Final Words With these ACC501 Solved MCQs, Quizzes, and Current Papers, you have everything you need to prepare effectively for your Mid Term exams. 👉 Don’t forget to practice online: http://exam.cyberian.pk/ 👉 Download the PDFs and start preparing today! ✨ Best of luck with your ACC501 Mid Term! ✨ ⸻ SEO Keywords: • ACC501 Solved MCQs • ACC501 Quiz Solutions PDF • ACC501 Mid Term Solved Papers • Virtual University ACC501 Exam Preparation • ACC501 Online Test Practice • Download ACC501 Solved Current Papers
  • 0 Votes
    1 Posts
    646 Views
    No one has replied
  • 0 Votes
    5 Posts
    3k Views
    zaasmiZ
    @zareen The “Uncaught TypeError: firebase.auth is not a function” error typically arises when the Firebase Authentication module hasn’t been correctly imported or initialized in your JavaScript code. Here’s a breakdown of the common causes and solutions: Missing Firebase Authentication import: Ensure you’ve imported the getAuth function from the Firebase Authentication module. JavaScript import { getAuth } from "firebase/auth"; Incorrect Firebase initialization: Verify that you have correctly initialized Firebase with your project credentials before attempting to use firebase.auth(). JavaScript import { initializeApp } from "firebase/app"; const firebaseConfig = { // Your Firebase configuration }; const app = initializeApp(firebaseConfig); const auth = getAuth(app); Conflicting Firebase script inclusions: If you’re including Firebase scripts directly in your HTML, ensure there are no duplicate inclusions or conflicts. Make sure that firebase-app.js and firebase-auth.js (or their modular equivalents) are included. Using outdated Firebase SDK: If you’re using an older version of the Firebase SDK, the firebase.auth() method might not be available. Consider updating to the latest version. Compatibility issues: If you’ve recently updated other libraries or are encountering unusual behavior, there might be compatibility issues. Check for known conflicts and consider using compatibility versions if necessary. Scope or context issues: In some cases, the firebase object might not be accessible in the scope where you’re trying to use it. Ensure that it’s properly defined and accessible within the relevant function or module. Asynchronous operations: If you’re calling firebase.auth() before Firebase has fully initialized, it might result in this error. Ensure that Firebase is initialized before attempting to use its services. Mixing modular and namespaced syntax: If you’re using the modular syntax (e.g., getAuth) in some parts of your code and the older namespaced syntax (e.g., firebase.auth()) in others, it can lead to conflicts. Stick to one syntax consistently throughout your project.
How to Build a $1,000/Month PAK VS BAN Live Live Cricket Streaming
File Sharing

1

Online

3.0k

Users

2.8k

Topics

8.2k

Posts
| |